Spreaders Bredal F8/F10
BREDAL F8 and F10 are towed fertilizer spreaders intended for professional use where there are stringent requirements for efficiency and profitability. The spreaders were developed to meet the various requirements for graduated application, spreading along field boundaries, and spreading in wedges and leftover areas and automatic starting and stopping in the headland. The BREDAL F8 and F10 are Bredal’s specialized fertilizer spreaders for professional use where efficiency and profitability are vital. These models are designed to meet the different requirements for graduated fertilization, border spreading, wedge spreading, leftover area spreading and automatic starting and stopping in the headland.
STANDARD EQUIPMENT
The trailed fertilizer spreader is prepared as standard for ISOBUS with newly developed, thoroughly tested software. Other standard equipment available for the F8 and F10 includes "A" discs for spreading commercial fertilizer, a SPC4500-1 spreader unit with 24-36 meter headland gear for headland spreading and standard spreaders are also equipped with section control. The F8 and F10 can be equipped with weight cells, which enables the spreader to control the application rate itself and ensure that it is correct in relation to the preferred volume entered. Another standard feature is a built-in tilt sensor which regulates the application rate in hilly terrain. The spreader is constructed with two separately controlled floor belts so it is possible to apply different amounts on the right and left sides. The two downchutes which place the fertilizer on the two spread discs are individually controlled on the right and left sides. This makes it possible to optimize the spreading pattern for varying working widths and application rates. Automatic flow correction is incorporated into the downchute control software so the downchute position automatically adapts to the actual application rate. In practice, this means that the spreading pattern will not change, regardless of whether a small or large volume is being spread. The F8/F10 is available with either a red-painted hopper or a stainless steel hopper, and various tyre mountings and track widths are available. The standard hopper for the F8 is 5.70 m3 and 6.60 m3 for the F10.
OPTIONAL ACCESSORIES
Optional accessories for models F8 and F10 include, among other things, weight cells that help to automatically correct the seed quantity while driving. In addition, liter weight is offered which is used to determine the density of the fertilizer to be sure that the spreader is dosing properly. In addition, it is possible to obtain increased container volume by means of a hopper extension if more capacity is needed and to obtain a hydraulic tarpaulin over the spreader for convenient operation when the spreader is to be filled.
TECHNICAL SPECIFICATION
| Model | F8 | F10 |
| Capacity | 5,70 m3 | 6,60 m3 |
| Capacity with hopper extension 23cm | 7,50 m3 | 8,60 m3 |
| Capacity with hopper extension 50 cm | / | 11,60 m3 |
| Netto weight | 3.200 kg | 3.800 kg |
| Total length | 6.600 mm | 6.600 mm |
| Standard spreading unit | SPC4500-2 | SPC4500-2 |
| Hopper length | 3.916 mm | 4.016 mm |
| Hopper width | 2.000 mm | 2.200 mm |
| Loading height min | 2.475 mm | 2.385 mm |
| Loading height max | 2.975 mm | 3.155 mm |
| Min. width outside of wheels | 2.250 mm | 2.250 mm |
| Max. width outside of wheels | 2.800 mm | 2.800 mm |
| Largest possible tyre dia | Ø 2.100 mm | Ø 2.100 mm |
